Range Overview:
Through The Wall Mounted Heat Recovery Unit The Vent-Axia Lo-Carbon HR25 Solo Plus through the wall heat recovery units are suitable for fitting through a 152mm (6”) circular hole and are designed for use in bathrooms, toilets and utility areas. Under the new Building Regulations Document F continuous running products, such as the Lo-Carbon HR25 Solo Plus installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore, only needs to move the amount of air as laid down in table 1.1b of Document F. The Vent-Axia Lo-Carbon HR25 Solo Plus is available with pullcord control.
Long Life DC Motor
The units are fitted with a 24V DC motor and are supplied with a state of the art Switch Mode Power Supply (S.M.P.S.) This has the ability to operate at only 2 Watts power consumption on normal setting, offering a 90% energy saving over conventional AC equivalents. A 5m cable is provided for fixed wiring of the unit to the S.M.P.S.
Typical Installation
The Lo-Carbon HR25 Solo Plus P (Pullcord) unit is designed for installation in a 152mm (6”) core drilled hole. All installation can be carried out from inside the building. The units are suitable for external walls up to 310mm thick.
Maintenance
Apart from removing odours, providing fresh air and recovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. These gradually build up and detract from the efficiency and appearance of the appliance. To ensure peak performance, the appliance, including the filters and heat exchanger should be cleaned every 6 months in accordance with the instructions supplied.
